Telaio porta-attrezzi per lavorazioni interceppi su due lati contemporaneamente. Il TMD è dotato di un impianto oleodinamico completo e autonomo per l’azionamento di vari attrezzi. La posizione degli attrezzi è regolabile in senso trasversale tramite comando oleodinamico azionabile dal posto di guida consentendo alla macchina di operare in filari di larghezza compresa tra 1,80 m e 2,60 m

TMD

EQUIPMENT FRAME

HP 35-80 | KW 26-59

Tool holder frame for interlocking work on two sides at the same time

The TMD is equipped with a complete and autonomous hydraulic system for operating various implements. The position of the implements can be adjusted transversely by means of a hydraulic control operated from the driver's seat, allowing the machine to operate in rows between 1.80 m and 2.60 m wide.

The 68 cm inter-row discs are mounted on a parallelogram swing arm and are equipped with automatic lateral movement, movement sensitivity adjustment and manual retraction from the driver's seat (independent for each side).

Suckers remove suckers up to 70 cm in height and can be used as an alternative to discs as mechanical weeders, especially in the case of very short inter-row distances. They are equipped with height adjustment and manual retraction that can be controlled from the driver's seat (independent for each side). The unique wire mounting system allows them to be replaced in seconds, avoiding long stops during work.

Discs and suckers can be shared with T3D shredders.

Standard equipment

Optional variants

Model
cm
m
m
Kg
TMD-D68
145
1,80
2,60
512
TMD-S92
145
1,80
260
530

Request more information

en_GB